Skip to article
IES Yorkshire and the HumberCollaboration model

Sharing specialist engineering facilities across Yorkshire and the Humber

A safe, equitable model for extending learner access to expensive or scarce technical environments.

Reading time
10 minute read
Evidence
7 primary sources
Reviewed
15 July 2026
Next review
15 January 2027
0% read
Text 100%
In 90 seconds

Start here

Use the short route now, then open the evidence or practical sections when you need more depth.

What is changing?AMRC

The Advanced Manufacturing Research Centre links industrial research and manufacturing technology in South Yorkshire.

Why it matters for further educationCurriculum decisions need evidence

A safe, equitable model for extending learner access to expensive or scarce technical environments.

What to do this termBegin with one programme

Identify one capability gap

Research asset
AMRC

The Advanced Manufacturing Research Centre links industrial research and manufacturing technology in South Yorkshire.

Rail investment
Goole rail village

Siemens Mobility's Goole site provides a named regional context for production, assembly, testing, logistics and maintenance learning.

LSIP geography
Five relevant areas

Four LSIP areas are wholly within Yorkshire and the Humber; the two northern Lincolnshire authorities are covered by the Greater Lincolnshire LSIP.

Shared access model

Start with capability, not equipment

A successful partnership defines learning, access and accountability before it opens a specialist facility to learners.

01Define the need
02Agree access
03Run a pilot
04Review total value
How this resource is organised

Published evidence reports what sources say. IES analysis explains the curriculum significance. IES recommendations are professional judgements for providers to test locally.

01
Published evidence

The Yorkshire and the Humber engineering context

The published picture

Advanced manufacturing, rail, aerospace, process industries, ports and clean energy make employer collaboration unusually tangible. In this collaboration model guide, the test is whether that context changes a specific learner decision.

West Yorkshire's Investment Zone is centred on life sciences and supports innovation and manufacturing connections. Skills England's July 2026 register lists LSIP specified areas for Hull and East Yorkshire, South Yorkshire, West Yorkshire, and York and North Yorkshire. North Lincolnshire and North East Lincolnshire sit in the Yorkshire and the Humber statistical region but form part of the Greater Lincolnshire LSIP. Curriculum teams should therefore use the LSIP matching their local-authority geography, then compare it with combined-authority strategies, current employer evidence and their own destinations. For this collaboration model topic, curriculum relevance matters more than the prominence of the organisation or announcement.

What the evidence supports

The University of Sheffield Advanced Manufacturing Research Centre works with industry on machining, automation, composites, digital manufacturing and related fields. Its facilities and industrial partnerships provide visible examples of technology adoption, but FE curriculum should focus on the technician capabilities underneath the demonstration: setting a datum, controlling a process, verifying output, interpreting data, managing a change and diagnosing deviation. The practical collaboration model question is what a provider should teach, sequence, resource or verify differently.

02
IES analysis

Named regional application

Why this matters

The Advanced Manufacturing Park and CATCH demonstrate specialist concentrations, but distance between South Yorkshire and the Humber is substantial. Colleges should form local clusters first and share digital resources regionally. A supervised block at specialist facilities can follow college preparation, with host induction, accessibility, evidence ownership and competence boundaries agreed in advance.

03
Try this in practice

Start with capability, access and accountability

How to use this

Specialist equipment is expensive to buy, maintain and staff. Yorkshire and the Humber has universities, research centres, employers and training organisations with facilities that can enrich FE learning, but proximity on a map does not equal access. Travel time, timetables, disability access, age restrictions, commercial work and supervision capacity can determine whether a partnership reaches learners fairly. Apply this test to the relevant Yorkshire and the Humber travel-to-work area, not to the regional label in isolation.

Partners should define the learner capability before choosing the facility. A visit to an automated cell is not equivalent to programming, safe proving, fault diagnosis or performance analysis. State what learners will do, what prior knowledge they need, what evidence they will produce and which competence remains outside scope. This prevents impressive equipment from becoming passive careers theatre. For Yorkshire and the Humber, local destination and employer evidence must confirm whether this is material to the programme.

Delivery considerations

Responsibility must be written down. Risk assessment, induction, safeguarding, insurance, maintenance, consumables, data protection, intellectual property, assessment authenticity and incident reporting all need owners. Where learners encounter operational or regulated environments, host rules and qualified supervision take priority. No shared-facility arrangement should imply occupational authorisation that has not been formally assessed. The Yorkshire and the Humber application should be dated, geographically bounded and reviewed when the underlying evidence changes.

04
IES analysis

What this means for FE engineering

Why this matters

The region is well placed to teach engineering through complete systems. A rail vehicle, process plant, offshore turbine or automated cell can connect design, materials, manufacture, electrical power, control, maintenance, safety, quality and environmental judgement. The educational value comes from tracing interfaces and decisions, not from using a prestigious employer name as decoration. In this collaboration model guide, the test is whether that context changes a specific learner decision.

SMEs need deliberate inclusion. Large organisations can attend boards and offer structured placements more easily, while smaller firms often provide broad technician roles and rapid feedback on changing practice. Short, well-facilitated employer conversations, shared project briefs and cluster-level engagement can make SME evidence usable without asking each firm to navigate a complex college structure. For this collaboration model topic, curriculum relevance matters more than the prominence of the organisation or announcement.

Curriculum implications

Use a stepped model: remote orientation, college-based preparation, supervised specialist activity, then structured reflection or application. A shared dataset, digital model or recorded demonstration can widen preparation, while the limited physical session focuses on decisions and practice that cannot be reproduced locally. Apply this test to the relevant Yorkshire and the Humber travel-to-work area, not to the regional label in isolation.

Evaluate total value. Include staff planning, travel, learner support, downtime and consumables as well as venue cost. Check participation and outcomes by learner group. If only the most confident learners benefit, redesign access rather than presenting exclusivity as excellence. For Yorkshire and the Humber, local destination and employer evidence must confirm whether this is material to the programme.

Questions to test

Plan for continuity if a partner withdraws or operational demand removes access. No essential assessment should depend on an informal promise. In Yorkshire and the Humber, a memorandum of understanding can define booking priority, minimum notice, cancellation, costs, responsibility and permitted use of data or images. The college should retain an alternative through its own equipment, another partner or an assessment method approved within the qualification. Apply this test to the relevant Yorkshire and the Humber travel-to-work area, not to the regional label in isolation.

Accessibility is a design requirement. Provide orientation information, sensory and physical access details, protective-equipment expectations and travel support early. Ask the host what adjustments are possible without compromising safety. Review who participated, who declined and why. If the arrangement repeatedly benefits a narrow group, it should not be described as a regional solution until the access problem is addressed. For Yorkshire and the Humber, local destination and employer evidence must confirm whether this is material to the programme.

05
Try this in practice

Delivery workshop

How to use this

Write a service specification before agreeing dates. Name the learner group, capability, prerequisite knowledge, maximum group size, active time per learner, equipment condition and evidence expected. Include an equivalent route for a learner who cannot attend because of disability, caring responsibilities or travel. In Yorkshire and the Humber, calculate the journey from the learner's normal campus at the required time, not from a regional centre point. A facility that offers twenty minutes of observation after a two-hour journey may be valuable for orientation, but it should not be described as practical capability development. Apply this test to the relevant Yorkshire and the Humber travel-to-work area, not to the regional label in isolation.

Use a responsibility matrix covering the provider, host and learner. Allocate induction, safeguarding, supervision, personal protective equipment, reasonable adjustment, emergency response, consumables, data, intellectual property, assessment and complaints. Confirm who can stop the activity and how an incident is reported to both organisations. Host technicians should approve operational boundaries; provider staff should retain curriculum and learner-support responsibility. If assessment evidence is gathered, the arrangement must meet awarding requirements for authenticity and authorised judgement. No partnership agreement should imply that access to specialist equipment grants an occupational licence or site competence. For Yorkshire and the Humber, local destination and employer evidence must confirm whether this is material to the programme.

Delivery considerations

After the pilot, calculate educational yield rather than publicity value. Record total learner-active minutes, capabilities attempted, evidence produced, staff hours, travel, non-participation and host feedback. Compare outcomes with a credible local alternative such as a portable rig, simulation or college practical. Continue only where the specialist environment adds sufficient value. A Yorkshire and the Humber network can then schedule repeatable blocks, share preparation materials and negotiate access collectively, while each provider remains accountable for equitable participation and the quality of learning. The Yorkshire and the Humber application should be dated, geographically bounded and reviewed when the underlying evidence changes.

06
Try this in practice

Quality tests and safeguards

How to use this

Define assessment ownership before delivery. If evidence is produced at a Yorkshire and the Humber partner site, specify how identity, authenticity, observation and storage will be managed under awarding rules. Host staff may provide technical feedback, but only authorised assessors should make decisions assigned to them. Learners must know whether an activity is formative, contributes evidence or is solely an experience, and what alternative exists if they cannot attend. Apply this test to the relevant Yorkshire and the Humber travel-to-work area, not to the regional label in isolation.

Use a post-pilot review with learners, teaching staff, technicians and operational managers. Compare the planned timetable with actual active learning time and identify hidden workload. A facility is not good value because its replacement cost is high. It is good value when learners gain a capability or understanding that was important, inaccessible locally and achieved safely at proportionate total cost. For Yorkshire and the Humber, local destination and employer evidence must confirm whether this is material to the programme.

07
IES analysis

A deeper curriculum test

Why this matters

Design preparation and consolidation as carefully as the specialist session. Before access, learners should understand the system purpose, vocabulary, hazards and observation task. During the session, keep group size and line of sight compatible with active participation. Afterwards, require learners to interpret evidence, compare the specialist environment with college equipment and identify limits on transfer. This three-part design allows a scarce Yorkshire and the Humber facility to deepen curriculum rather than operate as an isolated event.

08
IES recommendation

IES position

IES position

For collaboration model, IES recommends that Yorkshire and the Humber providers treat regional intelligence as a disciplined curriculum input, not a marketing slogan. Current claims should carry a source and date; proposed activity should be identified as proposed; and local employers and learner destinations should test whether a regional signal is material to the programme.

The collaboration model aim is not to chase every technology announcement. It is to strengthen engineering fundamentals, technical judgement and inclusive progression while making the context recognisably Yorkshire and the Humber. Each change should have an owner, intended learner benefit, evidence of implementation and review point.

09
Try this in practice

Put it into practice

How to use this

Begin the collaboration model work with one Yorkshire and the Humber programme rather than a whole-department relaunch. Use the published evidence as a starting point, then add current local intelligence. Record dissent and uncertainty. A decision not to change can be legitimate when the evidence is weak, the demand is outside the learner travel area or the proposed content would displace a more durable capability.

Review collaboration model impact in Yorkshire and the Humber through learner work, staff confidence, employer feedback and progression evidence. Do not claim causation from one data point. Share what changed and what remains under review so contributors can see that their time produced a considered response.

Delivery considerations

For this collaboration model guide, read the source list as an evidence trail, not a blanket endorsement. Check the original publication, its date, geography and definitions before reusing a figure. Corporate and investment pages establish what an organisation has announced; ONS services support statistical comparison; combined-authority plans establish public priorities. None alone proves the volume or level of local vacancies. Before acting in Yorkshire and the Humber, add live provider destinations and direct employer confirmation, then preserve a dated copy of the evidence used.

At the scheduled Yorkshire and the Humber collaboration model review, test every time-sensitive statement against the original publisher and replace broken or superseded links. Record material changes in an editorial note. If a project has been delayed, reduced, completed or cancelled, update the wording rather than deleting the earlier context without explanation. Readers should be able to distinguish evidence available at publication from later developments and understand why the IES recommendation still stands or has changed.

Key points to use
  • Write a capability statement before approaching a facility owner.
  • Complete a responsibility matrix and accessibility review.
  • Pilot with a small representative group.
  • Collect learner evidence and host feedback.
  • Decide whether to repeat, adapt or stop on educational value.
Action studio

Build your next-step plan

Select actions as you work through them. The checklist stays in this browser session unless you print or save the page.

Plain-language glossary

Terms used in this resource

FE
Further education: education and training commonly delivered by colleges and providers after compulsory school age and below or alongside higher education.
LSIP
Local Skills Improvement Plan: an employer-led assessment of skills priorities within a defined area.
Evidence register

Sources and review

These links were checked during the evidence review. External pages open in a new tab and may later be updated or moved by their publisher.

  1. 01 · University of Sheffield AMRCAdvanced Manufacturing Research CentrePublished or accessed Accessed 15 July 2026. Open external source ↗
  2. 02 · Department for TransportTransport Secretary opens £200 million rail manufacturing factory in GoolePublished or accessed 3 October 2024. Open external source ↗
  3. 03 · CATCHAbout CATCHPublished or accessed Accessed 15 July 2026. Open external source ↗
  4. 04 · Skills EnglandCurrent LSIP areas and designated employer representative bodiesPublished or accessed Updated 10 July 2026. Open external source ↗
  5. 05 · Department for Levelling Up, Housing and CommunitiesWest Yorkshire hosts England's third Investment ZonePublished or accessed 21 November 2023. Open external source ↗
  6. 06 · South Yorkshire Mayoral Combined AuthoritySouth Yorkshire Local Skills Improvement PlanPublished or accessed Accessed 15 July 2026. Open external source ↗
  7. 07 · Office for National StatisticsExplore local statisticsPublished or accessed Live statistical service. Open external source ↗

IES publication date: 15 July 2026

Evidence reviewed: 15 July 2026

Next scheduled review: 15 January 2027

Continue learning

Stay with Yorkshire and the Humber

Use this evidence alongside local employer insight, learner need and professional judgement.

1,961 words · Print-friendly

Stay close to the sector

Useful updates, occasionally.

New resources, sector briefings and opportunities to contribute to IES programmes. No noise.

By joining, you ask IES to send these updates. You can stop at any time. See privacy information.