Skip to article
IES Yorkshire and the HumberAccess and participation

Widening entry to engineering in Yorkshire and the Humber

Remove avoidable barriers while keeping technical, mathematical and safety expectations clear.

Reading time
10 minute read
Evidence
7 primary sources
Reviewed
15 July 2026
Next review
15 January 2027
0% read
Text 100%
In 90 seconds

Start here

Use the short route now, then open the evidence or practical sections when you need more depth.

What is changing?AMRC

The Advanced Manufacturing Research Centre links industrial research and manufacturing technology in South Yorkshire.

Why it matters for further educationCurriculum decisions need evidence

Remove avoidable barriers while keeping technical, mathematical and safety expectations clear.

What to do this termBegin with one programme

Review language, imagery and outreach

Research asset
AMRC

The Advanced Manufacturing Research Centre links industrial research and manufacturing technology in South Yorkshire.

Rail investment
Goole rail village

Siemens Mobility's Goole site provides a named regional context for production, assembly, testing, logistics and maintenance learning.

LSIP geography
Five relevant areas

Four LSIP areas are wholly within Yorkshire and the Humber; the two northern Lincolnshire authorities are covered by the Greater Lincolnshire LSIP.

Inclusive pathway

Remove barriers without lowering standards

Entry should reveal learning potential and safe practice, not simply reward previous access to engineering.

01Reach people
02Prepare fairly
03Design access
04Track progression
How this resource is organised

Published evidence reports what sources say. IES analysis explains the curriculum significance. IES recommendations are professional judgements for providers to test locally.

01
Published evidence

The Yorkshire and the Humber engineering context

The published picture

Advanced manufacturing, rail, aerospace, process industries, ports and clean energy make employer collaboration unusually tangible. In this access and participation guide, the test is whether that context changes a specific learner decision.

Yorkshire and the Humber contains several distinct engineering economies. South Yorkshire has nationally significant advanced manufacturing research and production assets around the Advanced Manufacturing Park. West Yorkshire combines manufacturing, textiles, digital technology and a large SME base. York and North Yorkshire include rail, food manufacturing, bioeconomy and rural energy needs. Hull and the Humber bring ports, process industries, offshore wind, logistics and energy transition activity. A regional page must connect these assets without pretending that learners can travel freely between all of them. For this access and participation topic, curriculum relevance matters more than the prominence of the organisation or announcement.

What the evidence supports

Siemens Mobility's rail village at Goole provides a current example of manufacturing investment linked to trains, components, logistics and skills. CATCH at Stallingborough offers an industry-led training environment for process, energy, engineering and renewables. Offshore wind operations and supply-chain activity around the Humber add further demand for electrical, mechanical, marine and safety capability. These named assets support authentic curriculum contexts, while live recruitment volumes still need direct checking. The practical access and participation question is what a provider should teach, sequence, resource or verify differently.

02
IES analysis

Named regional application

Why this matters

Rural travel, city-region boundaries and shift access can constrain participation. Engineering images should extend beyond heavy industry while remaining truthful about physical environments and PPE. Practical selection should allow preparation and adjustment, then observe safe learning and reasoning. Providers should track whether outreach converts into sustained progression across the different subregions.

03
Try this in practice

Find potential that conventional recruitment misses

How to use this

Participation is shaped before application. Images, examples, course titles, travel, open-event timing and the visibility of different engineers all affect who sees a credible route. In a region as varied as Yorkshire and the Humber, geography can be a structural barrier: specialist provision or employment may be distant from learners who cannot relocate or travel at shift times. Apply this test to the relevant Yorkshire and the Humber travel-to-work area, not to the regional label in isolation.

Prior exposure is not the same as potential. Applicants with family connections may know workshop language and have handled tools; others may bring strong reasoning, care and persistence without that opportunity. Entry activity should make instructions and safety expectations explicit, allow preparation, and observe learning and response to feedback. Reasonable adjustment changes access, not the required technical standard. For Yorkshire and the Humber, local destination and employer evidence must confirm whether this is material to the programme.

Delivery considerations

Data should cover application, offer, enrolment, retention, achievement and destination. A rise in applications without progression is not success. Small cohorts can produce unstable percentages, so teams should examine numbers and learner experience together and avoid publishing identifiable data. The Yorkshire and the Humber application should be dated, geographically bounded and reviewed when the underlying evidence changes.

04
IES analysis

What this means for FE engineering

Why this matters

The region is well placed to teach engineering through complete systems. A rail vehicle, process plant, offshore turbine or automated cell can connect design, materials, manufacture, electrical power, control, maintenance, safety, quality and environmental judgement. The educational value comes from tracing interfaces and decisions, not from using a prestigious employer name as decoration. In this access and participation guide, the test is whether that context changes a specific learner decision.

SMEs need deliberate inclusion. Large organisations can attend boards and offer structured placements more easily, while smaller firms often provide broad technician roles and rapid feedback on changing practice. Short, well-facilitated employer conversations, shared project briefs and cluster-level engagement can make SME evidence usable without asking each firm to navigate a complex college structure. For this access and participation topic, curriculum relevance matters more than the prominence of the organisation or announcement.

Curriculum implications

Inclusion continues in teaching. Explain tacit workshop conventions, pre-teach technical language, design demonstrations for visibility, offer accessible formats and check every learner's understanding. High expectations are compatible with scaffolded entry. Remove support gradually as competence becomes secure. Apply this test to the relevant Yorkshire and the Humber travel-to-work area, not to the regional label in isolation.

Employer partnership can widen access through relatable role models, transport-aware experiences and potential-based recruitment. It can also reproduce barriers if unpaid activity, restrictive shift assumptions or unnecessary criteria go unchallenged. Providers should discuss these constraints honestly. For Yorkshire and the Humber, local destination and employer evidence must confirm whether this is material to the programme.

Questions to test

Set an access objective that can be evaluated. A general wish to improve diversity is not enough. A Yorkshire and the Humber provider might examine conversion after outreach in a particular travel area, first-term retention after a revised induction or progression from a level 2 route. Choose ethical measures, retain numbers as well as percentages and avoid targets that encourage unsuitable recruitment without sustained support. Apply this test to the relevant Yorkshire and the Humber travel-to-work area, not to the regional label in isolation.

Co-design with learners who did and did not take the expected route. Pay attention to equipment fit, changing facilities, language, timetable, digital access, work-placement culture and confidence in reporting concerns. Act on themes within the provider's control and escalate partnership barriers. Publish the change made, not personal testimony that could identify or burden an individual. For Yorkshire and the Humber, local destination and employer evidence must confirm whether this is material to the programme.

05
Try this in practice

Delivery workshop

How to use this

Map the applicant journey in person-hours and journeys as well as web pages. Record when information is released, whether an open event requires evening travel, what equipment or clothing a candidate is expected to supply and how quickly an offer must be accepted. Test the process with users who have no family experience of FE or engineering. In Yorkshire and the Humber, compare the advertised reach of a course with public transport at actual start and finish times. Publish limits honestly and explore travel support or distributed delivery where the evidence shows exclusion. Apply this test to the relevant Yorkshire and the Humber travel-to-work area, not to the regional label in isolation.

Use diagnostic activity to plan teaching, not to label fixed ability. Check spatial reasoning, measurement, proportional thinking, technical reading, safe response and learning from feedback through accessible tasks. Explain each requirement and offer a practice example. Reasonable adjustments should preserve the construct being assessed. If fine motor speed is not required for entry, do not allow a timed assembly to become an accidental barrier. If colour identification is safety-critical in a particular context, design an appropriate method and seek specialist advice rather than relying on assumption. For Yorkshire and the Humber, local destination and employer evidence must confirm whether this is material to the programme.

Delivery considerations

Track belonging through observable conditions. Check whether personal protective equipment fits, demonstrations can be seen and heard, technical examples avoid stereotypes, group allocation gives everyone meaningful equipment time and staff challenge exclusionary behaviour. Combine learner feedback with attendance, achievement and destination evidence. For Yorkshire and the Humber, ask employers to review work experience and selection in the same way. Widening entry is successful when learners progress into credible next steps with the required standard, not simply when a different group appears in a launch photograph. The Yorkshire and the Humber application should be dated, geographically bounded and reviewed when the underlying evidence changes.

06
Try this in practice

Quality tests and safeguards

How to use this

Review progression pathways for hidden dead ends. A welcoming entry programme in Yorkshire and the Humber has limited value if timetabling, mathematics support, placement access or qualification rules prevent learners moving on. Publish routes with their real prerequisites and create diagnostic support early enough to act. Where no route exists, state that honestly and use partnership planning to address the gap. Apply this test to the relevant Yorkshire and the Humber travel-to-work area, not to the regional label in isolation.

Treat belonging as an operational issue. Clear standards for workshop conduct, correctly fitting PPE, inclusive examples and prompt response to exclusionary behaviour affect learning and safety. Staff need confidence to intervene and explain expectations. Celebrate varied routes into engineering without singling learners out as representatives of a group or requiring them to provide unpaid diversity work. For Yorkshire and the Humber, local destination and employer evidence must confirm whether this is material to the programme.

07
IES analysis

A deeper curriculum test

Why this matters

Examine mathematics as both an entry issue and an engineering tool. Diagnose the specific concepts needed for the programme, then teach them through units, measurement, proportion, formulae and interpretation in technical contexts. Do not disguise necessary demand, but avoid using a broad prior grade as the only evidence of future capability when policy and qualification rules permit a more complete judgement. A Yorkshire and the Humber pathway should show how support leads towards independence rather than permanently separating mathematics from engineering.

08
IES recommendation

IES position

IES position

For access and participation, IES recommends that Yorkshire and the Humber providers treat regional intelligence as a disciplined curriculum input, not a marketing slogan. Current claims should carry a source and date; proposed activity should be identified as proposed; and local employers and learner destinations should test whether a regional signal is material to the programme.

The access and participation aim is not to chase every technology announcement. It is to strengthen engineering fundamentals, technical judgement and inclusive progression while making the context recognisably Yorkshire and the Humber. Each change should have an owner, intended learner benefit, evidence of implementation and review point.

09
Try this in practice

Put it into practice

How to use this

Begin the access and participation work with one Yorkshire and the Humber programme rather than a whole-department relaunch. Use the published evidence as a starting point, then add current local intelligence. Record dissent and uncertainty. A decision not to change can be legitimate when the evidence is weak, the demand is outside the learner travel area or the proposed content would displace a more durable capability.

Review access and participation impact in Yorkshire and the Humber through learner work, staff confidence, employer feedback and progression evidence. Do not claim causation from one data point. Share what changed and what remains under review so contributors can see that their time produced a considered response.

Delivery considerations

For this access and participation guide, read the source list as an evidence trail, not a blanket endorsement. Check the original publication, its date, geography and definitions before reusing a figure. Corporate and investment pages establish what an organisation has announced; ONS services support statistical comparison; combined-authority plans establish public priorities. None alone proves the volume or level of local vacancies. Before acting in Yorkshire and the Humber, add live provider destinations and direct employer confirmation, then preserve a dated copy of the evidence used.

At the scheduled Yorkshire and the Humber access and participation review, test every time-sensitive statement against the original publisher and replace broken or superseded links. Record material changes in an editorial note. If a project has been delayed, reduced, completed or cancelled, update the wording rather than deleting the earlier context without explanation. Readers should be able to distinguish evidence available at publication from later developments and understand why the IES recommendation still stands or has changed.

Key points to use
  • Audit the journey from first contact to destination.
  • Test whether every entry criterion is necessary.
  • Offer a transparent preparation activity.
  • Check workshop, equipment and digital accessibility.
  • Use learner voice with progression data.
Action studio

Build your next-step plan

Select actions as you work through them. The checklist stays in this browser session unless you print or save the page.

Plain-language glossary

Terms used in this resource

FE
Further education: education and training commonly delivered by colleges and providers after compulsory school age and below or alongside higher education.
Evidence register

Sources and review

These links were checked during the evidence review. External pages open in a new tab and may later be updated or moved by their publisher.

  1. 01 · University of Sheffield AMRCAdvanced Manufacturing Research CentrePublished or accessed Accessed 15 July 2026. Open external source ↗
  2. 02 · Department for TransportTransport Secretary opens £200 million rail manufacturing factory in GoolePublished or accessed 3 October 2024. Open external source ↗
  3. 03 · CATCHAbout CATCHPublished or accessed Accessed 15 July 2026. Open external source ↗
  4. 04 · Skills EnglandCurrent LSIP areas and designated employer representative bodiesPublished or accessed Updated 10 July 2026. Open external source ↗
  5. 05 · Department for Levelling Up, Housing and CommunitiesWest Yorkshire hosts England's third Investment ZonePublished or accessed 21 November 2023. Open external source ↗
  6. 06 · South Yorkshire Mayoral Combined AuthoritySouth Yorkshire Local Skills Improvement PlanPublished or accessed Accessed 15 July 2026. Open external source ↗
  7. 07 · Office for National StatisticsExplore local statisticsPublished or accessed Live statistical service. Open external source ↗

IES publication date: 15 July 2026

Evidence reviewed: 15 July 2026

Next scheduled review: 15 January 2027

Continue learning

Stay with Yorkshire and the Humber

Use this evidence alongside local employer insight, learner need and professional judgement.

1,939 words · Print-friendly

Stay close to the sector

Useful updates, occasionally.

New resources, sector briefings and opportunities to contribute to IES programmes. No noise.

By joining, you ask IES to send these updates. You can stop at any time. See privacy information.